PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-919: Penetration Tester Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

Attendees to TN-919:Penetration Tester course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Advanced Hash Manipulation
  • Command Shell vs. Terminal Access
  • Enumerating Users
  • Exploitation Fundamentals
  • Injection Attacks
  • Legal Issues
  • Metasploit
  • Moving Files with Exploits
  • Obtaining and Passing Password Representations
  • Overview of Passwords
  • Penetration Testing Foundations
  • Penetration Testing Process
  • Penetration Testing via the Command Line
  • Profiling the Target
  • Reconnaissance
  • Scanning for Targets
  • Using a Proxy to Attack a Web Application
  • Vulnerability Scanning
  • Wireless Crypto and Client Attacks
  • Wireless Fundamentals

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking, and security experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: kdwagoner

Instructor comments: Very knowledgeable. Kept class focused and on task

Facilities comments: Good

Liked the class?  Then let everyone know!

CT-205: A+ Certification Course

Course Overview:

CT-205: A+ Certification Course provides students with the skills, knowledge and understanding that will enable them to install, configure, upgrade, troubleshoot and repair personal computer systems.  The A+ curriculum is excellent preparation for almost any computer related career or position.  This course lays the foundation for further study in networking and programming.  Designed for the new computer professional who has support knowledge of PC hardware, but needs to expand upon that knowledge.

Attendees to CT-205: A+ Certification Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Identifying, Adding & Removing System Components
  • Installation, Configuring & System Optimization
  • Diagnosing & Troubleshooting Problems
  • Power Protection & Safety Procedures
  • Motherboards, Processors & Memory
  • Printers
  • Basic Networking
  • Operating System Fundamentals
  • Installation, Configuration & Upgrade
  • Diagnosing & Troubleshooting
  • Networks

Prerequisites:

  • None

Comments

Latest comments from students

User: whiggins29

Instructor comments: Very knowledgeable, very engaging.

User: jstuke12

Instructor comments: Instructor was wonderful, Tim explained all questions fully and was a pleasure to learn from.

Facilities comments: Facilities were outstanding.

Like the class?  Then let everyone know!

PM-325: Project Management Professional (PMP) Exam Preparation

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMP certification exam, as well as any individual who has attended any Project Management Certification program in the past and needs to brush up on the material needed to pass the PMP exam.

Attendees to PM-325: Project Management Professional (PMP) Exam Preparation will receive official PMI (Project Management Institute) course materials and expert instruction from an official PMI Instructor.

TechNow Inc. is an official Authorized Training Partner of The Project Management Institute (PMI).

 

Dates/Locations:

Date/Time Event
08/04/2025 - 08/08/2025
08:00 -16:00 		PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX
10/27/2025 - 10/31/2025
08:00 -16:00 		PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

  • Project Initiation
  • Examining the Project Management Framework
  • Examining the Project Management Processes
  • Implementing Project Integration Management
  • Managing the Project Scope
  • Introducing Project Time Management
  • Introducing Project Cost Management
  • Introducing Project Quality Management
  • Introducing Project Human Resource Management
  • Introducing Project Communications Management
  • Introducing Project Risk Management
  • Introducing Project Procurement Management
  • PMP Code of Professional Conduct

Prerequisites:

A Bachelor’s degree & 4,500 hours of project management experience over 3 years/36 months.

OR

7,500 hours of project management experience over 5 years/60 months (if NO degree).

AND

Complete & submit the PMP certification application directly to PMI

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-939: Hacker Techniques, Exploits, and Incident Handling Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the exam.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. The course concludes with exercising real attack strategies to demonstrate the techniques acquired throughout the course.

Attendees to TN-939:  Hacker Techniques, Exploits, and Incident Handling will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

  • Backdoors & Trojan Horses
  • Buffer Overflows
  • Covering Tracks: Networks
  • Covering Tracks: Systems
  • Denial of Service Attacks
  • Exploiting Systems Using Netcat
  • Format String Attacks
  • Incident Handling Overview and Preparation
  • Incident Handling Phase 2: Identification
  • Incident Handling Phase 3: Containment
  • Incident Handling: Recovering and Improving Capabilities
  • IP Address Spoofing
  • Network Sniffing
  • Password Attacks
  • Reconnaissance
  • Rootkits
  • Scanning: Host Discovery
  • Scanning: Network and Application Vulnerability scanning and tools
  • Scanning: Network Devices (Firewall rules determination, fragmentation, and IDS/IPS evasion)
  • Scanning: Service Discovery
  • Session Hijacking, Tools and Defenses
  • Types of Incidents
  • Virtual Machine Attacks
  • Web Application Attacks
  • Worms, Bots & Bot-Nets

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: m_jurrens

Instructor comments: Both instructors Mr. Askey and Mr. Hackney, were very good. the open learning environment was extremely productive and I felt we all learned far more that we ever would out of a structured rote memorization course.

User: natebonds

Instructor comments: Both Mr. Askey and Hackney were extremely knowledgeable. They were also extremely interested in helping each student learn. I was particularly impressed with the way they tailored the course to optimize our time since we weren't testing. I feel like I know much much more than I did when the class started.

Facilities comments: The facilities were fine. I would have preferred it be closer to Lackland.

Liked the class?  Then let everyone know!