CT-405: PenTest+

 

 

 

 

 

 

Course Overview:

PenTest+ is an intermediate-level certification for cybersecurity professionals who are tasked with penetration testing to identify, exploit, report, and manage vulnerabilities on a network. PenTest+ is at the same certification level as CT-395: CySA+. Depending on your course of study, PenTest+ and CySA+ can be taken in any order, but typically follow the skills learned in CT-325: Security+. PenTest+ focuses on offense through penetration testing and vulnerability assessment while CySA+ focuses on defense through incident detection and response. The most qualified cybersecurity professionals have both offensive and defensive skills. Attend Tech Now training for hands-on, instructor led course to prepare you for the CompTIA PT0-002 exam. This exam is hands-on, performance-based questions and multiple choice, to ensure each candidate possesses the skills, knowledge, and ability to perform tasks on systems.

 

 

 

 

What’s Included:

  • 5 days of instructor led in classroom training
  • Labs
  • PenTest+ Courseware
  • Exam Voucher
  • PenTest+ onsite exam scheduling

Course Objectives:

  • Plan and scope penetration tests
  • Conduct passive reconnaissance
  • Perform non-technical tests to gather information
  • Conduct active reconnaissance
  • Analyze vulnerabilities
  • Penetrate networks
  • Exploit host-based vulnerabilities
  • Test application
  • Complete post-exploit tasks
  • Analyze and report pen test results

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

    • Module 01. Planning and Scoping Penetration Tests
    • Module 02. Conducting Passive Reconnaissance
    • Module 03. Performing Non-Technical Tests
    • Module 04. Conducting Active Reconnaissance
    • Module 05. Analyzing Vulnerabilities
    • Module 06. Penetrating Networks
    • Module 07. Exploiting Host-Based Vulnerabilities
    • Module 08. Testing Applications
    • Module 09. Completing Post-Exploit Tasks
    • Module 10. Analyzing and Reporting Pen Test Results

 

Prerequisites:

Target Audience:

This course is designed for cybersecurity professionals tasked with penetration testing and vulnerability management.

Comments

Latest comments from students

Liked the class?  Then let everyone know!

PM-221: Agile Overview for Executives and Leaders

 

Course Overview: Clear and detailed discussion on the following course content:

  • What is the Agile Adaptive  Methodology versus the Predictive (waterfall) Methodology?
  • The Agile Value Proposition, by explanation of the Agile Manifesto and Agile Principles.
  • What is the Scrum Framework by explanation of Scrum Roles, Ceremonies and Artifacts?
  • What are the artifacts of Product Planning, Release Planning and Sprint Planning?
  • What are the Agile impacts to corporate team structures and stakeholder alignment?
  • What are Agile myths and why an Agile transformation will fail?
  • What are Agile (hybrid) tailoring considerations?


Attendees to PM-221: Agile Overview for Executives and Leaderswill receive TechNow approved course materials and expert instruction.

 

Dates/Locations:

No Events

Duration: 1 Days

Course Objectives: Are you and executive or leader in your organization and interested in learning about Agile principles? This course details the Agile framework that uses an adaptive life cycle, specifically related to using the Scrum approach.

Upon successful completion of this course, students will be able to:

  • Understand an overview of the main aspects that leadership must know to implement strategic opportunities with Agile principles for product quality and on-time product delivery
  • Participants will dive into understanding the strategic and tactical elements of implementing Agile and Scrum into their organization
  • Receive details on how to understand the organizational impact that the Agile transformation could have on the different aspects of your current business processes

Target Student:

  • Designed specifically for leaders and senior managers or anyone wanting to understand the high-level basics of the Agile Framework

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom.  Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

    • Identify the components of a computer network and describe their basic characteristics
    • Understand the model of host-to-host communication
    • Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
    • Describe LANs and the role of switches within LANs
    • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
    • Install a switch and perform the initial configuration
    • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
    • Describe the TCP/IP Transport layer and Application layer
    • Explore functions of routing
    • Implement basic configuration on a Cisco router
    • Explain host-to-host communications across switches and routers
    • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
    • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
    • Describe the operation, benefits, and limitations of static routing
    • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
    • Describe the application and configuration of inter-VLAN routing
    • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
    • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
    • Configure link aggregation using EtherChannel
    • Describe the purpose of Layer 3 redundancy protocols
    • Describe basic WAN and VPN concepts
    • Describe the operation of Access Control Lists (ACLs) and their applications in the network
    • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
    • Describe basic Quality of Service (QoS) concept
    • Describe network and device architectures and introduce virtualization
    • Introduce the concept of network programmability and Software-Defined Networking (SDN)
    • Configure basic IOS system monitoring tools
    • Describe the management of Cisco devices
    • Describe the current security threat landscape
    • Describe threat defense technologies
    • Implement a basic security configuration of the device management plane
    • Implement basic steps to harden network devices

Lab Objectives:

      • Get started with Cisco Command-Line Interface (CLI)
      • Observe How a Switch Operates
      • Perform Basic Switch Configuration
      • Implement the Initial Switch Configuration
      • Inspect TCP/IP Applications
      • Configure an Interface on a Cisco Router
      • Configure and Verify Layer 2 Discovery Protocols
      • Implement an Initial Router Configuration
      • Configure Default Gateway
      • Explore Packet Forwarding
      • Troubleshoot switch Media and Port Issues
      • Troubleshoot Port Duplex Issues
      • Configure Basic IPv6 Connectivity
      • Configure and Verify IPv4 Static Routes
      • Configure Iv6 Static Routes
      • Implement IPv4 Static Routing
      • Implement IPv6 Static Routing
      • Configure VLAN and Trunk
      • Troubleshoot VLANs and Trunk
      • Configure a Router on a Stick
      • Implement Multiple VLANs and Basic Routing Between the VLANs
      • Configure and Verify Single-Area OSPF
      • Configure and Verify EtherChannel
      • Improve Redundant Switched Topologies with EtherChannel
      • Configure and Verify IPv4 ACLs
      • Implement Numbered and Named IPv4 ACLs
      • Configure a Provider-Assigned IPv4 Address
      • Configure Static NAT
      • Configure Dynamic NAT and Port Address Translation (PAT)
      • Implement PAT
      • Log into the WLC
      • Monitor the WLC
      • Configure a Dynamic (VLAN) Interface
      • Configure a DHCP Scope
      • Configure a WLAN
      • Define a Remote Access Dial-In User Service (RADIUS) Server
      • Explore Management Options
      • Explore the Cisco DNA Center
      • Configure and Verify NTP
      • Configure System Message Logging
      • Create the Cisco IOS Image Backup
      • Upgrade Cisco IOS Image
      • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
      • Secure Console and Remote Access
      • Enable and Limit Remote Access Connectivity
      • Secure Device Administrative Access
      • Configure and Verify Port Security
      • Implement Device Hardening

Prerequisites:

      • Familiarity in the following networking topics:
        • TCP/IP
        • IP Configuration
        • Peer-to-Peer Networking
        • Subnetting
        • Building a Routing Table
      • It is not required but highly recommended to have the following certifications:

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class?  Then let everyone know!

N-455: Securing Networks with ASA Fundamentals (SNAF)

Course Overview:

In this course, you will gain the knowledge and skills needed to configure, maintain, and operate Cisco ASA 5500 Series Adaptive Security Appliance.

Attendees to N-455: Securing Networks with ASA Fundamentals (SNAF) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introducing Cisco Security Appliance Technology and Features
  • Cisco Adaptive Security Appliance and PIX Security Appliance Families
  • Getting Started with Cisco Security Appliances
  • Essential Security Appliance Configuration
  • Configuring Translations and Connection Limits
  • Using ACLS and Content Filtering
  • Configuring Object Grouping
  • Switching and Routing on Security Appliances
  • Configuring AAA for Cut-Through Proxy
  • Configuring the Cisco Modular Policy Framework
  • Configuring Advanced Protocol Handling
  • Configuring Threat Detection
  • Configuring Site-to-Site VPNS Using PreShared Keys
  • Configuring Security Appliance Remote Access VPNs
  • Configuring Cisco Security Appliance for SSL VPN
  • Configuring Transparent Firewalls Mode
  • Configuring Security Contexts
  • Configuring Failover
  • Managing Security Appliances

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

MS-10231: Designing a Microsoft SharePoint 2010 and 2013 Infrastructure

 

Course Overview:

This course is intended for IT Professionals who use Microsoft SharePoint 2010 in a team-based, medium-sized to large environment. While they may have implemented a SharePoint deployment, they have limited experience in designing a SharePoint infrastructure. They likely work as a senior administrator who acts as a technical lead over a team of administrators. Members of this audience should have at least 6 months experience with SharePoint 2010 (including pre-released versions of the product).

Attendees to MS-10231: Designing a Microsoft SharePoint 2010/2013 Infrastructure will receive TechNow approved course materials and expert instruction.

Date/Location:

No Events

Duration: 5 days

Course Objectives:

  • Designing a Logical Architecture
  • Planning Service Application Architecture
  • Planning for Performance and Capacity
  • Designing a Physical Architecture
  • Designing a Security Plan
  • Planning Authentication
  • Planning Managed Metadata
  • Planning Social Computing
  • Designing Enterprise Search Strategy
  • Planning Enterprise Content Management
  • Developing a Plan for Governance
  • Designing a Maintenance and Monitoring Plan

Prerequisites:

  • At least 2 years experience administering, deploying, managing, monitoring, upgrading, migrating, and designing SharePoint servers
  • At least one year’s experience of mapping business requirements to logical and physical technical design
  • Working knowledge of network design, including network security

Comments

Latest comments from students

 

Liked the class?  Then let others know!