TN-385: TCP/IP Analysis & Implementation

Course Overview:

This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment.  This course begins by providing a comprehensive protocol stack analysis.  It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.

Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • A thorough comprehension of each level of the protocol stack
  • Configuring UNIX & Windows to access internetworks
  • Configuring & setting up a Cisco router
  • Properly implementing subnets to avoid ongoing maintenance headaches
  • Routing & routing protocols, RIP, OSPF, and IGRP
  • How to troubleshoot a wide range of routing problems
  • All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
  • How to avoid common internetworking problems
  • How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
  • How to design, build, configure, & manage TCP/IP internetworks
  • Applying a structured methodology for troubleshooting TCP/IP internetworks
  • ACL's on Cisco routers

Prerequisites:

  • Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON,  & MAIL).

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-565: Nessus Vulnerability & Compliance Auditing

Course Overview:

This course provides security professionals with the skills and knowledge to perform vulnerability and compliance scanning of supported operating systems, devices, and applications. Students will construct custom scan policies for topology discovery, network vulnerability detection, credentialed patch audits, and compliance benchmarks, and discuss the underlying technologies utilized by the Nessus scanner.

This course provides students with the necessary information to prepare for the Tenable Certified Nessus Auditor (TCNA) exam.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Introduction to Nessus and Vulnerability Scanning
  • Nessus Installation and Administration
  • Basic Nessus Scan Operation
  • Nessus Scan Configuration and Policy Creation
  • Vulnerability Analysis and Reporting with Nessus
  • Advanced Scan Configuration and Policy Creation
  • Introduction to Compliance and Auditing
  • Nessus Auditing Features
  • Windows System Auditing
  • Unix System Auditing
  • Cisco IOS Auditing
  • Nessus Database Auditing
  • Nessus Content Auditing
  • Auditing to Industry Guidelines
  • Auditing to Federal Guidelines

Prerequisites:

Students should possess a basic understanding of TCP/IP networking, operating systems security, and common client/server applications.

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-315: Complete Hack and Defend

 

Course Overview:

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network.  This course is heavily based on Kali and primarily on Metasploit.  In TN-315: Complete Hack and Defend class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it in mixed-platform environment including Windows, Linux, Solaris, and Cisco.  This course is 90% hacking, but  defenses for demonstrated hacks will be discussed.  If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-315: Complete Hack & Defend Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introduction to Pen Testing using the PTES model
  • Metasploit Basics
    • MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
  • Intelligence Gathering
    • Nmap, Databases in Metasploit, Port Scanning with Metasploit
  • Quick Intro to Ruby
    • Writing a simple Ruby script to create a custom scanner
  • Vulnerability Scanning
    • Importing Nessus Results
    • Scanning with Nessus from Within Metasploit
  • Exploitation
    • Using the Metasploit Framework and console to exploit
  • Meterpreter
    • Compromising a Windows System
    • Attacking MS SQL, xp_cmdshell
    • Dumping Usernames and Passwords, extracting and dumping hashes
    • Pass the Hash and Token Impersonation
    • Pivoting
    • Railgun
    • Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
  • Avoiding Detection
    • Creating Stand-Alone Binaries with MSFpayload
    • Encoding with MSFencode and Packers (go Green Bay:)
  • Exploitation Using Client Side Attacks
    • Introduction to Immunity Debugger
    • Using Immunity Debugger to Decipher NOP Shellcode
  • Metasploit Auxiliary Modules
  • Social Engineer Toolkit (SET)
    • Spear-Phishing, Web Attack
    • Creating a Multipronged Attack
  • Creating Your Own Module
    • Adapt an existing Module
    • Add some PowerShell and Run the Exploit
  • Meterpreter Scripting
  • Capture The Flag Exercise

Prerequisites:

  • This is an advanced Information Security Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • An understanding of TCP/IP

Comments

Latest comments from students

User: dhonore

Instructor comments: Dave's presentation style is engaging and lively.

Facilities comments: The room was adequate for the needs of the class.

User: phouck

Instructor comments: David was very good. Although he went very fast at times.

Facilities comments: The room was ok. it was bit dark.

 

Liked the class?  Then let everyone know!

TN-335: Advanced Penetration Testing Using Open Source Tools

Course Overview:

This is an advanced course that assumes the attendee is a qualified security professional with experience using security tools and understands the concepts behind penetration testing. Courses that build up the expertise that enables a student to succeed in this course is Security+, CEH, CISSP, and any of the GIAC certifications. This course is completely hands-on and utilizes the BackTrack tool suite from backtrack-linux.org. The course covers, in detail, various attacks and tools that are contained in the BackTrack tool suite.

Attendees to TN-335: Advanced Penetration Testing Using Open Source Tools will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Information Security and Open Source Software
  • Operating System Tools
  • Firewalls
  • Scanners
  • Vulnerability Scanners
  • Network Sniffers
  • Intrusion Detection Systems
  • Analysis and Management Tools
  • Encryption Tools
  • Wireless Tools
  • Forensic Tools
  • More on Open Source Software

Prerequisites:

  • Experience in IT Security
  • Solid basic knowledge of networks and TCP/IP
  • Experience in command line under Linux and Windows is required

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

CL-355: Containers, Kubernetes, and Red Hat OpenShift Administration

 

Course Overview:

Through an introduction to Docker, Kubernetes, and Red Hat OpenShift Platform, this training course helps you understand one of the key tenets of the DevOps and DevSecOps Platform (DSOP) movement: continuous integration and continuous deployment. The CI/CD pipeline becomes well understood and implemented in an open architecture.  Containers have become a key technology for the configuration and deployment of applications and micro services. Kubernetes is a container orchestration platform that provides foundational services in Red Hat OpenShift Container Platform, which allows enterprises to manage container deployments and scale their applications using Kubernetes.

This training course provides an overview of the DoD Enterprise DevSecOps Platform (DSOP) Reference Design, its current state, and ties to DoD Cloud Platform One (P1). Workflows of the DoD Iron Bank container repository are introduced, along with an overview of the DoD Pipeline as represented in Big Bang.  Continuous authorization cATO via Party Bus within NIST RMF is presented. You will become aware of the Platform One (P1) integrations and relationship to Docker, Kubernetes, Istio (Red Hat OpenShift Service Mesh) and Red Hat OpenShift Platform.

In addition to gaining an understanding of these tools, you will build core administration skills through the installation, configuration, and management of an OpenShift cluster and containerized applications.

Course Objectives:

  • Learn about Containers, Docker, Kubernetes, and OpenShift architecture
  • Overview DoD Enterprise DevSecOps Platform (DSOP) Reference Design and DoD Cloud Platform One (P1)
  • Tie together awareness of various DoD Cloud offerings and their relationships
  • Create containerized services
  • Manage containers and container images
  • Deploy multi-container applications
  • Install an OpenShift cluster
  • Configure and manage masters and nodes
  • Secure OpenShift
  • Control access to resources on OpenShift
  • Monitor and collect metrics on OpenShift
  • Deploy applications on OpenShift using source-to-image (S2I)
  • Manage storage on OpenShift

Course Outline:

  • Getting started with container technology
  • Creating containerized services
  • Managing containers
  • Managing container images
  • Creating custom container images
  • Deploying containerized applications on OpenShift
  • Deploying multi-container applications
  • Troubleshooting containerized applications
  • Comprehensive Review of Introduction to Container, Kubernetes, and RedHat OpenShift
  • Introducing Red Hat OpenShift Container Platform
  • Installing OpenShift Container Platform
  • Describing and exploring OpenShift networking concepts
  • Executing commands
  • Controlling access to OpenShift resources
  • Allocating persistent storage
  • Managing application deployments
  • Installing and configuring the metrics subsystem
  • Managing and monitoring OpenShift Container Platform

Dates/Locations:

No Events

Duration: 5 Days

Prerequisites:

  • Ability to use a Linux® terminal session and issue operating system commands
  • Good foundation in Linux
  • Experience with web application architectures and their corresponding technologies

Target Audience:

  • Developers who wish to containerize software applications
  • Administrators who are new to container technology and container orchestration
  • Architects who are considering using container technologies in software architectures
  • System administrators
  • System architects
  • Architects and developers who want to install and configure OpenShift Container Platform
  • Those working in the field of DevSecOps supporting DoD Platform One (P1) and other implementations

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!