N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI)

Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
Optimize OSPFv2 and OSPFv3 behavior
Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
Implement route redistribution using filtering mechanisms
Troubleshoot redistribution
Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
Optimize MP-BGP in IPv4 and IPv6 environments
Troubleshoot MP-BGP for IPv4 and IPv6
Describe the features of Multiprotocol Label Switching (MPLS)
Describe the major architectural components of an MPLS VPN
Identify the routing and packet forwarding functionalities for MPLS VPNs
Explain how packets are forwarded in an MPLS VPN environment
Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
Implement Dynamic Host Configuration Protocol (DHCP)
Describe the tools available to secure the IPV6 first hop
Troubleshoot Cisco router security features
Troubleshoot infrastructure security and services

Prerequisites:

CCNA certification
N-415: Implementing and Operating Cisco Enterprise Network Core Technologies
General understanding of network fundamentals
Basic knowledge of how to implement LANs
General understanding of how to manage network devices
General understanding of how to secure network devices
Basic knowledge of network automation

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-315: Cisco Secure Virtual Private Networks

Course Overview:

This course is designed for students who intend to work with virtual private networks (VPNs) using IPSec. The course includes detailed coverage of the VPN 3000 Concentrator, a scalable remote access platform that offers encryption, high availability, and superior performance. This class is an invaluable theory and configuration guide for the VPN 3000 series of products, with its thorough coverage of concentrators, hardware clients, and software clients.

Attendees to N-315: Cisco Secure Virtual Private Networks will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Network Security & Virtual Private Network Technologies Cisco VPN 3000 Concentrator Series Hardware Overview
Routing on the VPN 3000
Configuring the Cisco VPN 3000 for Remote Access Using Pre-shared Keys
Configuring the Cisco VPN 3000 for Remote Access Using Digital Certificates
The Cisco VPN Client Firewall Feature
Configuring the Cisco 3002 Hardware Client for Remote Access
Configuring the Cisco 3002 Hardware Client for User & Unit Authentication
Configuring Cisco VPN Clients for Backup Server, Load Balancing & Reverse Route Injection
Configuring the Cisco 3000 Concentrator for IPSec over TCP & UDP
Configuring LAN-to-LAN VPNs on the Cisco 3000
Network Monitoring & Administration Troubleshooting

Prerequisites:

Students who attend this advanced course must have experience in configuring Cisco IOS software
CCNA certification
Basic knowledge of the Windows operations system
Familiarity with the networking & security terms & concepts

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-385: TCP/IP Analysis & Implementation

Course Overview:

This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment. This course begins by providing a comprehensive protocol stack analysis. It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.

Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

A thorough comprehension of each level of the protocol stack
Configuring UNIX & Windows to access internetworks
Configuring & setting up a Cisco router
Properly implementing subnets to avoid ongoing maintenance headaches
Routing & routing protocols, RIP, OSPF, and IGRP
How to troubleshoot a wide range of routing problems
All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
How to avoid common internetworking problems
How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
How to design, build, configure, & manage TCP/IP internetworks
Applying a structured methodology for troubleshooting TCP/IP internetworks
ACL's on Cisco routers

Prerequisites:

Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON, & MAIL).

Comments

Latest comments from students

Liked the class? Then let everyone know!

PA-215: Palo Alto Networks Firewall Essentials FastTrack

Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration 5 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS). Additionally Panorama and Troubleshooting are addressed.

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!

Like the class? Then let everyone know!

N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications. In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP. Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations. Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny. Other protocols such as Nortel's UNIStim will be addressed. As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures. Various open source tools including those in BackTrack are used for VoIP attacks. A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

VoIP Architecture
VoIP Signaling and media protocols
Common VoIP authentication mechanisms
Common VoIP encryption techniques
VoIP protocol analysis with Wireshark
Maintaining QoS while mitigating DoS
VoXML, XML, and application integration security
Converged network security design and implementation
Impact of NAT and firewalls
SIP, H.323, and MGCP vulnerabilities
VPN, IPsec and SRTP to secure VoIP services
Penetration testing with open source tools
Attacks for Eavesdropping, call redirection, and DoS
Design of hacked firmware virtualization layer
Concise lockdown steps for network hardware and VoIP

Prerequisites:

This is an advanced Information Security Course which requires basic Windows & UNIX competency
Certification or 2 years of experience in these operating systems is highly recommended
As well as an understanding of TCP/IP

Comments

Latest comments from students